JET 1632 - 16" Open Side Drum Sander w/ Stand - 1.75HP 115V

723520K_main.jpg
723520K_det1.jpg
723520K_alt2.jpg
723520K_alt3.jpg
723520K_alt1.jpg
723520K_main.jpg
723520K_det1.jpg
723520K_alt2.jpg
723520K_alt3.jpg
723520K_alt1.jpg

JET 1632 - 16" Open Side Drum Sander w/ Stand - 1.75HP 115V

from 1,099.99

With’s Jet’s open sided drum sanders, you can take the slabs from your mill and run them through to desired thickness and level of finish. 16” Single pass sanding surface can accommodate slabs up to 32” with a second pass. The perfect companion to any of our mills, this lines up with the maximum width of cut on all of our mills with the exception of the 52 & 60. Powerful 1.75HP Motor only needs a standard 120V outlet (20amp circuit requirement). The amount of time saved on sanding will more than pay for itself after your first project.

** Delivery & Assembly Options limited to 30 mile radius of zip code 98021 before additional charges may apply, please contact for more info

Options:
Quantity:
Add To Cart
  • Sandsmart™ control continuously monitors the load on the drum motor and automatically regulates the speed of the conveyor motor to maintain the highest feed rate without overload
  • Conveyor bed parallelism is easily adjusted by turning the dial on the outside of the bed - no tools required
  • Parallelism adjust dial features a stop to quickly return the conveyor bed to a flat position
  • Dust hood includes an integrated channel that mirrors the shape of the drum and directs chips and dust to the 4" collection port
  • Precision-machined and dynamically balanced extruded aluminum drum is designed to dissipate heat and protect the work surface from heat-damage
  • Precision-flattened reinforced steel conveyor bed
  • Redesigned conveyor system pulls the workpiece through the sander instead of pushing
  • One rotation of the top-position handwheel adjusts the drum height by 1/16"
  • The relative depth scale on the handwheel allows the user to reset and measure the depth for every project
  • Infinitely variable speed control of up to 10 feet per minute allows the user to choose the optimal feed rate
  • Toolless abrasive take-up clips make changing abrasives quick and easy
  • Snipe is virtually eliminated thanks to the adjustable tension rollers that apply downward pressure to the workpiece
  • Separate feed and drum motors provide independent control, optimizing the performance of the sander
  • Conveyor belt TRACKERS™ reduce the need for manual belt adjustments
  • Integrated on/off switch and variable speed control knob are conveniently located
  • Stand features a 20" x 37" footprint to increase stability and has a storage shelf and pre-drilled holes for casters
  • Drum is easily removable
  • Drum utilizes sealed and permanently lubricated ball bearings for longer life
723520K Specs.JPG